Friday, October 18, 2019
Accounting aspects of Southwestern Airlines Essay
Accounting aspects of Southwestern Airlines - Essay Example In 1966 Kelleher was practicing law in San Antonio when a customer named Rollin King wished-for starting a short-haul airline like California-based Pacific Southwest Airlines.The airline would fly the "Golden Triangle" of Houston, Dallas, and San Antonio and by staying within Texas, avoid federal regulations. Kelleher and King formed a company, raised initial capital, and filed for regulatory approval from the Texas Aeronautics Commission. Regrettably, the other Texas-based airlines, namely Braniff, Continental, and Trans Texas, opposed the idea and waged a battle to prevent Southwest from flying. Kelleher argued the company's case before the Texas Supreme Court, which ruled in Southwest's favor. The US Supreme Court refused to hear an appeal filed by the other airlines. In the late 1970s, it looked as if the company could begin flying.''Southwest then began building a management team, and the purchase of three surplus Boeing 737s was negotiated. In the meantime, Braniff and Texas In ternational continued their efforts to put off Southwest from flying. The underwriters of Southwest's initial public stock offering withdrew, and a restraining order against the company was obtained two days before its scheduled inaugural flight. Kelleher again argued his company's case before the Texas Supreme Court, which ruled in Southwest's favor a second time, lifting the restraining order. Southwest Airlines began flying the next day, June 18, 1971' (Freiberg & Freiberg, 1996). Southwest Airlines: An Introduction Southwest Airlines has always been thriving in terms of productivity, good employee and union relations, and customer satisfaction at a time when most airline carriers are besieged in all these areas. Crucial to the company's hallmarks is its culture of flexibility and family-orientation. Herb Kelleher summed up the Southwest culture and commitment to employees: 'We don't use things like TQM. It is just a lot of people taking pride in what they're doing. You have to recognize that people are important. How you treat them determines how they treat people on the outside.. I give people the license to be themselves and motivate others in that way. We give people the opportunity to be a maverick. You don't have to fit in a constraining mold at work-you can have a good time. People respond to that' (Lancaster, 1999). Despite the fact that 90% of Southwest employees are unionized, labor relations have been surprisingly positive, especially by industry standards. There are no official structures for labor or union participation in management administration; nevertheless the company led by top managers who vigorously seek out and respond to employee views has taken the lead on developing and maintaining this culture. 'One significant base of the company's achievement in a rather unsteady industry is the fact that the unions are not involved in pushing their roles beyond the conservative collective bargaining and grievance functions they perform. In this regard, Southwest differs from some other renowned cases of Human Resource-based and customer-oriented success stories' (Kochan, 1999). Southwest Airlines: Its Accounting Aspects The September 11 incident pushes the airline industry into economic turmoil, resulting in unemployment, insolvency, and the prospect of fragile prospects. Soon after the September 11, most major airlines announced sharp service reductions, grounded aircraft, and laying-off of employees. Yet 'during the first decade of deregulation, more than 150 carriers, many of them start-up airlines, collapsed into insolvency. Eight of the 11 major airlines dominating the industry in 1978 ended up filing for bankruptcy, merging with other carriers, or just disappearing from the radar screen. All together, the industry made enough money during this period to buy two Boeing 747s.' (Dempsey, 1984).
Thursday, October 17, 2019
Choose an environmental topic, analyse the message about the issue Essay
Choose an environmental topic, analyse the message about the issue that is being constructed in the media source you have selected - Essay Example Such a broadened understanding in turn helps in effective policy formulation and resolve issues in an amicable manner. The depiction of environmental issues by the media has increased significantly, over the last couple of decades. Various environmental groups as well as government departments have been relying on the media heavily, for promotion of their self-interests as well as for raising awareness regarding the depletion of sources and encouraging the public to support their cause. Such an alliance of the media and the environmental groups / and or other groups endorsing environmental issues; often raises significant issues related to government policy formulation, risk to public life, etc. among others. This paper aims to study and analyze the issue of ââ¬Å"oil sands pollutionâ⬠in Canadian waterways as represented by the Canadian print media ââ¬â especially the newspapers. For this purpose articles from some select newspapers such as The Globe and Mail, Edmonton Journal, The Gazette, and The Vancouver Sun are chosen for analysis. Dryzek has identified several discourses associated with environmental problems such as - Survivalism, Environmental problem solving, Sustainability, Green radicalism, Administrative rationalism, Democratic pragmatism, Economic rationalism and Sustainable development. The articles discussed below, will seek to identify and analyze some such discourses and assess their relevance and impact, generated by the print media. In this article the writer has discussed about the rising level of pollution around the Athabasca River and its tributaries on account of emissions from oil sands. In order to lend credibility to the arguments presented in the article the writer has included a research paper presenting contradictory views of the energy industry and the Alberta government regarding the underlying causes of this issue. The writer has directed
Life in the City Essay Example | Topics and Well Written Essays - 750 words
Life in the City - Essay Example This perspective, which removes urban places from the context of their societies, may be appropriate to what these disciplines wish to learn of and from the city. Engels underlines that urban settings has a negative impact on an individual and his morals. He writes that: "the brutal indifference, the unfeeling isolation of each in his private interest, becomes the more repellant and offensive, the more these individuals are crowded together". Such an approach is less useful in anthropology, however. For cross-cultural comparisons and analyses of urban development, the city must be treated as only one of many social institutions such as kinship, religion, and subsistence activity that anthropologists always have conceptualized as parts of a socio-cultural whole. A spirit of independence and autonomy, a desire for innovation, a predilection for social status based on achievement rather than birth, and a sense of community beyond the family or kin group are characteristics often associated with the city. In this view, urban places become centers of social change, economic development, and personal freedom in contrast to conservative, ascriptive, and traditional rural settlements. Cities are thus perceived as sources of novel economic and productive arrangements and new political orders that challenge the fabric of society. The ideological approach thus studies the "rules" that compose the cultural roles of cities and their societies. It investigates the derivation of these rules outside the city or their diffusion from the urban sphere into the cultural setting (Engels). Whyte pays a special attention to increased poverty in urban settings and slums as a dominant feature of the eastern city. Whyte writes: "People appear as social work clients, as defendants in criminal cases or as undifferentiated members of the masses". It is possible to say that the ideological and interactional roles and links between cities and societies are not unchanging. Therefore the concept of "adaptation" must be added to introduce a dynamic aspect. Cities are and always have been in a continual process of adjustment to their external socio-cultural environments. "Environment" in this context does not directly involve physical circumstances affecting the city, such as water supply, soil type, and rainfall average. Following Durkheim and Tonnies, with a specifically urban population and a distinctly urban pattern of social organization, the administrative city is further from the rural countryside in ideology and life-style than the regal-ritual type is. The patterns of belief and social life, the cultural "rules" of the state society, may remain basically the same in village and city. The urban area, on the other hand, concentrates a sophistication--an elaborateness of custom and ideology--that mark it off sharply from the rural zone. Rather than a hiatus in belief, rather than an antagonism based on wholly different urban and rural patterns, the administrative city is simply so much more than its rural environs that rural areas appear culturally denuded, socially deficient, and ideologically backward by comparison. The city may still reflect the countryside, but it does so with such intensity that it appears to have its own independent luminosity. Durkheim underlines that: "solidarity in indu strial society is based not on uniformity bit on difference". The industrial city becomes a node of the power and
Wednesday, October 16, 2019
Accounting aspects of Southwestern Airlines Essay
Accounting aspects of Southwestern Airlines - Essay Example In 1966 Kelleher was practicing law in San Antonio when a customer named Rollin King wished-for starting a short-haul airline like California-based Pacific Southwest Airlines.The airline would fly the "Golden Triangle" of Houston, Dallas, and San Antonio and by staying within Texas, avoid federal regulations. Kelleher and King formed a company, raised initial capital, and filed for regulatory approval from the Texas Aeronautics Commission. Regrettably, the other Texas-based airlines, namely Braniff, Continental, and Trans Texas, opposed the idea and waged a battle to prevent Southwest from flying. Kelleher argued the company's case before the Texas Supreme Court, which ruled in Southwest's favor. The US Supreme Court refused to hear an appeal filed by the other airlines. In the late 1970s, it looked as if the company could begin flying.''Southwest then began building a management team, and the purchase of three surplus Boeing 737s was negotiated. In the meantime, Braniff and Texas In ternational continued their efforts to put off Southwest from flying. The underwriters of Southwest's initial public stock offering withdrew, and a restraining order against the company was obtained two days before its scheduled inaugural flight. Kelleher again argued his company's case before the Texas Supreme Court, which ruled in Southwest's favor a second time, lifting the restraining order. Southwest Airlines began flying the next day, June 18, 1971' (Freiberg & Freiberg, 1996). Southwest Airlines: An Introduction Southwest Airlines has always been thriving in terms of productivity, good employee and union relations, and customer satisfaction at a time when most airline carriers are besieged in all these areas. Crucial to the company's hallmarks is its culture of flexibility and family-orientation. Herb Kelleher summed up the Southwest culture and commitment to employees: 'We don't use things like TQM. It is just a lot of people taking pride in what they're doing. You have to recognize that people are important. How you treat them determines how they treat people on the outside.. I give people the license to be themselves and motivate others in that way. We give people the opportunity to be a maverick. You don't have to fit in a constraining mold at work-you can have a good time. People respond to that' (Lancaster, 1999). Despite the fact that 90% of Southwest employees are unionized, labor relations have been surprisingly positive, especially by industry standards. There are no official structures for labor or union participation in management administration; nevertheless the company led by top managers who vigorously seek out and respond to employee views has taken the lead on developing and maintaining this culture. 'One significant base of the company's achievement in a rather unsteady industry is the fact that the unions are not involved in pushing their roles beyond the conservative collective bargaining and grievance functions they perform. In this regard, Southwest differs from some other renowned cases of Human Resource-based and customer-oriented success stories' (Kochan, 1999). Southwest Airlines: Its Accounting Aspects The September 11 incident pushes the airline industry into economic turmoil, resulting in unemployment, insolvency, and the prospect of fragile prospects. Soon after the September 11, most major airlines announced sharp service reductions, grounded aircraft, and laying-off of employees. Yet 'during the first decade of deregulation, more than 150 carriers, many of them start-up airlines, collapsed into insolvency. Eight of the 11 major airlines dominating the industry in 1978 ended up filing for bankruptcy, merging with other carriers, or just disappearing from the radar screen. All together, the industry made enough money during this period to buy two Boeing 747s.' (Dempsey, 1984).
Life in the City Essay Example | Topics and Well Written Essays - 750 words
Life in the City - Essay Example This perspective, which removes urban places from the context of their societies, may be appropriate to what these disciplines wish to learn of and from the city. Engels underlines that urban settings has a negative impact on an individual and his morals. He writes that: "the brutal indifference, the unfeeling isolation of each in his private interest, becomes the more repellant and offensive, the more these individuals are crowded together". Such an approach is less useful in anthropology, however. For cross-cultural comparisons and analyses of urban development, the city must be treated as only one of many social institutions such as kinship, religion, and subsistence activity that anthropologists always have conceptualized as parts of a socio-cultural whole. A spirit of independence and autonomy, a desire for innovation, a predilection for social status based on achievement rather than birth, and a sense of community beyond the family or kin group are characteristics often associated with the city. In this view, urban places become centers of social change, economic development, and personal freedom in contrast to conservative, ascriptive, and traditional rural settlements. Cities are thus perceived as sources of novel economic and productive arrangements and new political orders that challenge the fabric of society. The ideological approach thus studies the "rules" that compose the cultural roles of cities and their societies. It investigates the derivation of these rules outside the city or their diffusion from the urban sphere into the cultural setting (Engels). Whyte pays a special attention to increased poverty in urban settings and slums as a dominant feature of the eastern city. Whyte writes: "People appear as social work clients, as defendants in criminal cases or as undifferentiated members of the masses". It is possible to say that the ideological and interactional roles and links between cities and societies are not unchanging. Therefore the concept of "adaptation" must be added to introduce a dynamic aspect. Cities are and always have been in a continual process of adjustment to their external socio-cultural environments. "Environment" in this context does not directly involve physical circumstances affecting the city, such as water supply, soil type, and rainfall average. Following Durkheim and Tonnies, with a specifically urban population and a distinctly urban pattern of social organization, the administrative city is further from the rural countryside in ideology and life-style than the regal-ritual type is. The patterns of belief and social life, the cultural "rules" of the state society, may remain basically the same in village and city. The urban area, on the other hand, concentrates a sophistication--an elaborateness of custom and ideology--that mark it off sharply from the rural zone. Rather than a hiatus in belief, rather than an antagonism based on wholly different urban and rural patterns, the administrative city is simply so much more than its rural environs that rural areas appear culturally denuded, socially deficient, and ideologically backward by comparison. The city may still reflect the countryside, but it does so with such intensity that it appears to have its own independent luminosity. Durkheim underlines that: "solidarity in indu strial society is based not on uniformity bit on difference". The industrial city becomes a node of the power and
Tuesday, October 15, 2019
Withholding Information Essay Example for Free
Withholding Information Essay It is frequently advisable for those in positions of authority in government to withhold information from general public Some information the public has the right to know while other information is better to be withheld. There are plenty of reasons why it is better not revealing information. Withholding information that may put the population in danger would be better than revealing information which would bring chaos. On the flipside, transparency and honesty between the government and the public are very important. Transparency is essential in order for a democracy to function and honesty is important in cases when there is need for strong relations to be created. And although I support the idea of freedom of information, the general public will never be educated enough to maintain consensus and national problems. In these cases withholding information helps to ensure stability in terms of national security, preserving the peace and well-being. The main reason authority keeps information is the fear from criticism and disapproval. A rational society would never be satisfied with vague information and would want to take part in the decision-making process. Government has a lot of information which the people may have an interest in but still some of this information is dangerous. Things like war strategies and secret missions need to be withheld. Being kept in the dark on some things as long as its truly for the good of the nation and not for someoneââ¬â¢s benefit is acceptable. For example if government find the cure for cancer but decide that it would ruin pharmaceutical companies and chose not to reveal this information it isnââ¬â¢t right. On the other hand, there is a lot of information which public doesnââ¬â¢t deserve access to. Like information that endangers the government. Another reason for withholding information could be to cover mistakes and not causing discontent. The government always makes big promises and eventually it will have to fulfill some of them. If government promise to reduce the crime rate in 30% within a year and donââ¬â¢t follow the plan it will lose itââ¬â¢s credibility. I think that the idea some information to be withheld is valid. However, information that would improve the living standard of people or information which is of great importance for the future of humanity, in my opinion shouldnââ¬â¢t be kept. There is no clear moral answer here. When there is too much that is at stake, we canââ¬â¢t say that information should always be free. Should it benefit the public to know how their government works, or it should benefit the government to have the full control over our lives. Im not so sure.
Monday, October 14, 2019
Since X Ray Was Discovered Health And Social Care Essay
Since X Ray Was Discovered Health And Social Care Essay Since x-ray was discovered by Roentgen in 1895, its medical application has grown to be a fast and dynamic imaging modality. Todays imaging department consists of an impressive array of diagnostic and therapeutic devices from x-ray machines, CT Scan, PET Scan, linear accelerator, which mainly use ionizing radiation for diagnosis and treatment of illnesses; and with the addition of ultrasound and MRI that use sound waves and magnets for diagnosis instead of x-rays. Thus, radiology is considered as the window of the healthcare institution and the radiologic technologists are the persons behind these state-of-the art machines. In the x-ray department, one of the divisions of radiology department, the x-ray machines are used for diagnoses of illnesses. For 100 years the film-screen system has been the imaging system of choice. This system uses radiographic film, screen and wet chemistry to generate an image just like conventional photography. Every RTs goal is to provide high quality images for accurate diagnosis; therefore each step is very critical. The RT must be equipped with knowledge and skills from anatomy, positioning and exposure techniques. One slight mistake can imperil the image and yields an unacceptable radiograph which entails repeat examination that primarily means additional radiation dose to the patient. This is one of the disadvantages of a film-screen system wherein once the film has been processed; there is no way to alter it. What you see is what you get. Fortunately, with the growing technology of imaging modalities came the introduction of digital imaging which follow the same concep t as digital cameras wherein brightness and contrast of the image can be changed and images can now be cropped. Its advantage compared to film-screen is very obvious, since images can be altered, repeat examinations, oftentimes is no longer necessary. The technology is superb and its debut has grown the curiosity of every RT whether it is efficient compared to the traditional system. And of course, it is. However, as with every other technology has its drawback. Since the new technology primarily uses computer and computer-aided equipments oftentimes do the entire job. The question lies wherein will the competence of the RT in terms of exposure technique factors be same as using the conventional way? Several international studies stated that because of the convenience of the system, the RTs using the machine oftentimes fail to consider the standard protocols in every technique selection because images can be manipulated later. Alteration of images from time to time should not be a daily scenario because manipulation sometimes interfere accurate diagnosis. As of the researchers knowledge, there are no known local related studies in the decline of RTs competence in using CR. One of the reasons may be this modality is still in the stage of introduction in the Philippines and that its implication is not yet intensively studied. But this does not stop the researchers to seek of finding out if there is indeed a decline in RTs competence with the new system. This study is a comparative-correlational research in determining the level of radiographic competence between film-screen system and CR on exposure technique factor selection. The main objectives of the researchers are to compare if there is a significant difference in terms of radiographic competence in the RT who uses film-screen from CR and to determine if the respondents profile and agency has a significant relationship in terms of radiographic competence. Base on the result of the study, the researchers will be able to assess the essential skills needed for the profession. Technolo gy indeed has helped us in many ways. However, without the competence of the professional manipulating the equipment is futile. This means that the technologist who has the sole responsibility of manning the state-of-the art equipment should not rely from technology, instead technology should rely on them. REVIEW OF LITERATURE This study primarily aims to compare the level of radiographic competence on exposure technique factor selection between film-screen system and computed radiography (CR). Exposure technique factor selection is an important foundation for these two types of image receptor (IR) or imaging system. Image receptor is a device that converts x-rays into visible light. Competence should not vary whether the radiologic technologist (RT) is using the conventional or digital system, otherwise, it will defeat the intensive study of the exposure techniques during the undergraduate years. Furthermore, providing appropriate exposure techniques is paramount in the profession since these techniques also mean radiation dosage on the part of the patient. According to Fauber Johnston (2012), the radiographers actions at the control panel directly determine the nature and the make-up of the x-ray beam. This means that the selected exposure technique factor is directly proportional to patient dose. In ad dition, it is the responsibility of the radiographer to learn the philosophy, factors and methods that minimizes ionizing radiation exposure to the patient (Callaway, 1996). This also means that an RT is providing quality patient care when he/she gives an adequate and necessary amount of radiation to the patient. Competence in Radiologic Technologist Klemp (1980) defined competence as an underlying characteristic of a person which results in effective and/or superior performance on the job. A competent person is imbued with the right knowledge, skills and attitude on a particular task. Other authors define competence as a cluster or related knowledge, skills, and attitudes that reflects a major portion of ones job, which has a relationship in the performance on the job that can be measured with well-accepted standards, and that can be improved with training and development (Parry, 1996). In radiologic technology, for example, an newly licensed RT already possess cognitive and motor skills at an entry level, however, it can only be enhanced through proper and consistent training in a chosen specialized field during the course of his/her work as an RT. Knowledge, Skills, Attitude As mentioned, competence is a combination of knowledge, skills and attitudes. These components are essential as a whole because the absence of one component greatly affects ones performance. According to Dowd (1996), knowledge as part of competence includes theories and concepts which were gained as a result of the experience of performing certain tasks. Furthermore, in the field of radiologic technology he added that knowledge includes job-specific terminology, methods of organizing information and an understanding of principles and generalizations. On the other hand, Hans Reynold in 1928 defined skill as combined mental and physical qualities which make it useful to industry. Knowledge if combined with skills is important in the workplace. Furthermore, one cannot develop a skill without knowledge and at higher levels, knowledge are converted to skills (Klieme, 2004.) The last component that determines competence is the attitude. The attitude such as beliefs, values, traits, and motives is a part of competence because it indicates the persons response to a particular event or situation. Attitude refers to the predisposition or mental state of individuals/users towards a product, ideas, or attributes. It also implies on mental readiness on a particular object or his attributes toward an object or his preferences. (Hulse Dowd, 1996). In the field of radiologic technology, competence does not only mean that the RT is equipped with the knowledge and skills but RT is also imbued with the right attitude and judgment to provide each patient with quality care On Radiographic Competence In the field of radiologic technology, one aspect of the profession requires competent skills in radiographic exposure factor technique. The said competence is essential especially in the diagnostic x-ray imaging, wherein exposure factors are the key to accurate diagnosis and providing radiation dosage to minimum level. For 100 years, film-screen technique has been the method of choice in radiographic imaging (Bushong 2009). Film-screen system uses radiographic films, radiographic intensifying screens and wet chemistry to make the image visible. Furthermore, this conventional system should adhere to the standards of the darkroom requirements. Film-screen system has the same concept as a typical conventional camera. In a film-screen technique, radiologic technologist should be certain on the exposure factors to be applied in a particular exposure because improper selection of exposure factors can lead to overexposure or underexposure of the film. Overexposure or underexposure degrades image quality and therefore, it can lead to rejection of film, thus necessitates the need for repeat examination. Repeat examination provides unnecessary dose to the patient and additional costs to the department. On the other hand, as with the other innovations in technology, diagnostic imaging has shifted its course from conventional to digital. Computer applications are employed nowadays in diagnostic imaging modalities. An appropriate analogy that is easy for most people to understand is the replacement of typical film cameras with digital cameras: images can be taken, immediately examined, deleted, corrected, and cropped, and subsequently sent to a network of computers. Computed radiography system (CR) is an affordable solution to digital imaging. Instead of the film, CR employs an imaging plate to capture x-rays and makes it visible when the plate is scanned into a computer and digitized it. Once the image is converted to data, it can be recorded on a laser printed film or can be transmitted and stored digitally. It has special features like manipulation or enhancement of the image. Its specialized software is used to image viewing with enhanced functions similar to film-screen system, s uch as contrast, brightness, and zoom. (dicomsolutions.com, 2011). Computed radiography has practical technical advantages compared with conventional techniques, such as wide contrast dynamic range, post-processing functionality, multiple image viewing options, and electronic transfer and archiving possibilities. In this system, image quality can be achieved because of the post-processing techniques that are not possible with film-screen system. This system is convenient for the technologists because the RT can compensate for exposure technique inaccuracies by adjusting the technique during post-processing phase of the image rather than that time of exposure. In radiologic technology field, competence means that the RT is equipped with the knowledge, skills, attitude and judgment to provide each patient with quality care. According to Olavidez (2005), competence is essential in the field of Radiologic Technology because RT is a fast growing profession; RT deals with human lives and most of all, the RT curriculum is not enough to prepare the students to be equipped with the skills necessary for the profession especially in the special fields of radiologic technology. For an RT to become competent, he/she should have undergone formal educational background followed by specialized training in their chosen field that takes months. As an RT, he/she should have comprehensive knowledge and skills in patient care, radiologic procedures and radiation dosage. Exposure Technique Factors Exposure technique factors influence and determine the quantity and quality of x-radiation to which the patient is exposed (Bushong, 2009). Kilovolt peak (kVp), milliamperage (mA), exposure time and source-to-image distance (SID) are the principal exposure technique factors. Furthermore, the said factors also affect image quality. Milliamperage and exposure time are the exposure factors that affects the quantity of radiation. Milliampere is the measure of x-ray tube current, whereas milliampere-second (mAs) is the produce of exposure time and exposure tube current. They directly affect the optical density (OD) of the film. Optical density is the overall blackening of the film. The darker the film, the higher number of x-rays is given to the patient. The higher the number of x-rays that are the given to the patients, the greater the radiation dosage they receive. Source-to-image receptor distance also affects the quantity of the radiation. The closer the patient is to the x-ray source, the higher dosage the patient gets. For chest x-ray, the standard SID is 72 inches, while for the other x-ray examinations, the standard SID is 40 inches. Kilovoltage peak (kVp), directly affects the quality of radiation. kVp is the maximum electric potential that travels across the x-ray tube. Since kVp affects the quality of th e x-ray beam, it also affects the quality of the radiographic image. Kilovoltage directly affects contrast. Contrast is the variation of densities on the film. The advantage of using higher kVp is that the patient will receive lower dosage of radiation because it will not be absorbed. However, higher kilovoltage produces more scatter radiation, thus increases the transmission of x-rays to the image receptor and degrades image quality. The best techniques to prevent scatter radiation are using beam restrictors such as collimator to filter low energy x-rays and to cut-off low energy rays using radiographic grids. By employing beam restrictors and grid will enhance image contrast because scatter radiation will be prevented. Furthermore, scatter radiation will also provide unnecessary dose to the patient. Therefore, exposure technique factor selection is essential. To provide quality radiographs and to limit patients to radiation should be a goal for every RT. According to Bushong (2009), RTs are required to use their skills to produce the best possible image with single exposure (Bushong, 2009). Otherwise, repeat examination will provide unnecessary radiation dose to the patient. Therefore, it is necessary for the RT to be equipped with knowledge and skills to manipulate these exposure technique factors to produce desired optical density, contrast, and image detail on the finished radiograph. RT in Film-Screen System In conventional film-screen system, before each examination, the radiologic technologist must select the optimum radiographic technique factors- kVp, mA, and exposure time (Bushong 2009). There are many considerations to determine the value of each factor and they are complexly interrelated. Contrast and Density are the photographic factors of the radiograph and it functions to make the image visible. Visibility of image is important so that anatomical image will appear for proper diagnosis. After each exposure, there is no way to manipulate its contrast and density and thats what makes film-screen system difficult as inadequate contrast or density entails repeat examination. Since manipulation of the image is not possible in this system, the RT should be certain with the technique factors prior to the exposure; otherwise, miscalculations can result to underexposure or overexposure. In a film-screen system, overexposure and underexposure of the image is considered unacceptable becaus e the important structures are not visible and thus it is not a tool for proper diagnosis. In other words, image quality is dependent on exposure factors. RT in Computed Radiography In CR system, image quality is not dependent on exposure factors. Digital image is unrelated to dose, kVp becomes less important. Since, image quality is not dependent on exposure factors, image can be manipulated. In a conventional system, the film serves as both image acquisition and display medium. With CR, the image plate serves as the acquisition medium but does not display the image. Since these functions are separate in CR, the digital signal can be altered to compensate for underexposure or overexposure and an acceptable image can be displayed on the monitor (Shephard, 2003). With CR system, post-processing is possible that helps enhance image thus allowing the RT to alter image contrast and density. Since image can be manipulated or modified, underexposure or overexposure is no longer a problem with this system, because it can usually salvage variations from the optical technique, whereas technical error with a screen-film system often requires a repeat exposure (Pizzutiello , 1993; Cesar, 1997). Therefore, with CR, technical errors are eliminated because of exposure variances that are possible with salvageable results, assuming adequate kilovoltage is used (Ballinger, 1999). On Assessment of RT Competence In order to know the competence of a professional, assessment plays a vital role. Assessment is important so as to evaluate if the RT is still competent to do the job. Since we are in the era of rapid technology, it may come to a point that we will just put our confidence on computers rather than our competence. According to Olavidez (2005), competence is an observable ability and it can be measured against set of standards. Assessment of competence is a combined knowledge, skills, and attitudes that reflect the current work practice. Furthermore, it can bridge the gap between workplace requirements and standard. Selection of exposure technique factor is of extreme importance because RT deals with exposing patients to radiation. Exposure technique factor is equivalent to the quality and the quantity of radiation that exits the patient, therefore, the RT should be precise in giving exposure technique factors. Providing appropriate radiation dose is necessary to prevent the patients from the hazards of the ionizing radiation, therefore prior to the exposure of the patient, accurate exposure techniques should be practiced. The issue of providing accurate techniques lies in a digital system, wherein images can be manipulated during post-processing. According to Fredrick Walker (medicalimagingmag, 2008), a radiologic technologist at Sharp Rees-Stealy in San Diego, CA, he pointed out if the image is too dark, we can manipulate the image using post-processing techniques like windowing or shadowing or to adjust contrast without having to repeat the examination. Furthermore, since image can be manipul ated during post-processing, it can encourage complacency rather than accuracy with exposure techniques which can result in overexposed or underexposed images (Medicalxray, 2010). In addition, according to Enfinger (2012), that it is true that the image can be adjusted, however, it is not recommended because the raw data from the initial exposure will contain information from scatter radiation that degrades image quality even if it is manipulated later. According to Shephard (2003), it is likely that digital imaging will replace conventional screen-film radiography in many modern medical imaging centers in the near future. It has already been stated that even if the image can be manipulated during post-processing, this should not be a practice because somehow it can deteriorate image quality which results in inaccurate diagnosis. One retrospective analysis of patients who had undergone lumbar spine radiographs for the diagnosis of osteoporosis compare diagnostic accuracy with screen-film versus digital radiography. The authors suspected that bone mineral loss could be more easily visible with screen-film imaging due to the fact that image contrast cannot be adjusted with this modality, whereas CR (and DR) images undergo digital post-processing techniques to maximize contrast. This could result in misleading results that confound diagnostic strength in osteoporosis. Therefore, this is a challenge now for the RT to maintain their competence amidst the aid of technology. Competence of RT is the foundation of providing quality patient care by providing appropriate radiation dose for accurate diagnosis. Synthesis The focus of the literature and studies cited was the radiographic competence of RT between film-screen system and computed radiography and it is through this study that the researchers can identify and compare whether their competence will differ based on the image receptor that is being used. In addition, competence in exposure technique factors is essential because this will also mean radiation dose to the patient. It has already been affirmed that the concept has been there for the past few years and therefore the present study is certainly not a new concept. Nevertheless, the researchers deemed it necessary to conduct a study assessing the competence of the RT for the benefit of the institution where they belong because the researcher wants to propose a professional program that could strengthen the foundation of the RTs. It is also important for the school to offer the programs since almost the RT from the different hospitals in Davao City are products of this institution. This study is similar to the other studies cited in this section because it stated on the effects of digital imaging on the radiographic competence of the RTs. Furthermore, previous studies dealt with the effects of image manipulation on image quality and it indirectly link to the competence of the RTs. Conceptual Framework In this view, the researchers attempted to assess the level of radiographic competence of the RTs in terms of knowledge, skills and attitude. Through assessing the competence of the RTs, the researchers are able to determine the level of radiographic competence; their strengths and weakness of radiographic techniques. On the other hand, the researchers identified the factors that can affect their competence, such as the respondents demographic profile in terms of age, sex, number of years in service and educational attainment and the profile of institution such as agency and its classification are also considered. To have a vivid picture of the study, Figure 1 served as the research paradigm SCHEMATIC DIAGRAM Independent Variables Dependent Variables Factors Respondents Profile Age Number of years in service Agency Private Public Image Processing Film-Screen System Computed Radiography Level of Radiographic Competence Knowledge Skills Attitude Figure 1 Schematic Diagram showing the relationship between the independent and dependent variables STATEMENT OF THE PROBLEM The study aims to compare the level of radiographic competence in using a film-screen system and computed radiography on exposure technique factor selection; specifically it aims to answer the following questions: What is the respondents profile in terms of: Age Number of years in service What is the agency of the healthcare institutions in terms of: Private Public What is the level of the respondents radiographic competence in using film-screen system on exposure technique factor selection in terms of: Knowledge Skills Attitude What is the level of the respondents radiographic competence in using computed radiography on exposure technique factor selection in terms of: Knowledge Skills Attitude Is there a significant relationship between the respondents profile and the level of radiographic competence in terms of: Knowledge Skills Attitude Is there a significant relationship between the agency of healthcare institution and the level of radiographic competence in terms of: Knowledge Skills Attitude Is there a significant difference in the level of radiographic competence between film-screen system and computed radiography in terms of: Knowledge Skills Attitude HYPOTHESES There is no significant relationship between the respondents profile and the level of radiographic competence in terms of: Age Number of years in service There is no significant relationship between the agency of the healthcare institution and the level of radiographic competence in terms of: Public Private There is no significant difference in the level of radiographic competence between film-screen system and computed radiography in terms of: Knowledge Skills Attitude DEFINITION OF TERMS Accuracy- refers to the degree of conformity of a measured or calculated value to its actual or specific value. Computed Radiography- is an affordable solution of digital imaging system that uses a photostimulable phosphor as the image receptor. Digital Radiography- an all-digital technique in which x-ray absorption is quantified by assignment of a number to the amount of x-rays reaching the detector; this is also called as cassetteless system. Exposure- measure of ionization produced in air by x-rays or gamma rays. Exposure Factor Selection. It is the factor set by the radiographer (kVp, and mAs) to produce visibility of structures in the radiograph. Film Screen System- is the conventional image receptor that uses radiographic film, radiographic intensifying screen and wet chemistry to visualize the image in the radiograph. Image receptor- is a device that converts x-ray beam into visible image. Level of Radiographic Competence- refers to the measure of the level of competence of the radiologic technologist in achieving goals and objectives in providing quality radiographs with minimum radiation dose to patients. Private hospital- is a hospital owned by a profit company or a non-profit organization and privately funded through payment for medical services by patients themselves. Public hospital- is a hospital which is owned by the government and receives government funding. SIGNIFICANCE OF THE STUDY This study seeks to determine if there is a significant difference on the level of the respondents radiographic competence in exposure technique factor selection between film-screen system and computed radiography; and to determine if there is a significant relationship on the level of radiographic competence between respondents profile and agency. Based on the results of this study, the researchers can identify the strengths and weaknesses of the RTs and if it shows significant decline in the competence of the RT in the CR system, the researchers will propose an enhancement program for the professionals. The said program will also be a part of the Continuing Professional Education (CPE), and it will be added to the CPE units needed to renew RT licenses. This study will be most helpful to the radiology department of the hospital to enhance Health Care Delivery by limiting radiation dose to the patients. Furthermore, determining the attitude toward the imaging system will help the department to reevaluate the mental and the emotional state of the RTs. Mental and Emotional state of the RT are important since they are dealing with patients. It is the responsibility of the RT to render quality patient care by providing appropriate radiation dose. Furthermore, this study will also be of most helpful to the schools offering radiologic technology as to intensify the foundation of the students in terms of exposure technique factors. Based on the result of the study, there may be a need to revise the curriculum to further intensify the skills of the RT students. Computed Radiography is not a part of the standard RT curriculum, and it may be one factor that affects the decline of competence on the part of the professional as well as the students. Chapter 2 METHODOLOGY This portion discusses the research design used, the research locale where the study will be conducted, the description of samples and the sampling technique, the instrument used, the details of procedure and the statistical analysis to answer the research problem. Research Design The study will employ a comparative-correlational research. To determine the difference between the level of competence in film-screen system and computed radiography, comparative study will be used. Furthermore, to determine the relationship between the respondents profile and agency between the levels of the radiographic competence, correlational design will be employed. Setting The study will be conducted from the selected hospitals in Davao, Digos and Tagum City employing either film-screen system and computed radiography. The hospitals using film-screen system are the following: Alexian Brothers Health and Wellness Center, Km. 4, McArthur Highway, Matina, Davao City; Davao Regional Hospital, located at Apokon, Tagum City 8112 and Davao Del Sur Provincial Hospital which is located at Lapu-lapu St. Digos, City Davao Del Sur. On the other hand, the hospitals using the computed radiography system are the following: Davao Doctors Hospital (DDH), E. Quirino Ave., Davao City; Southern Philippines Medical Center (SPMC), J.P Laurel Ave., Bajada, Davao City and Davao Medical School Foundation and Hospital (DMSF), Medical Drive, Bajada, Davao City. Participants The respondents of the study are the Registered Radiologic Technologists and Associate X-ray Technologists coming from the selected hospitals in Davao City employing a film-screen and computed radiography system. Moreover, the qualified respondents should be at least six months in service at the time of the evaluation. Measures The research assessment is composed of four parts. The first part of the assessment consists of questions pertaining to the profile of the respondents and hospital. The second part consists of questions on the respondents level of knowledge on exposure technique factor selection. The questions are specifically structured in such a way that assesses the respondents acquired knowledge on technique selection. Based on the results, the attitude in terms of respondents response in both film-screen and CR system will be categorized as follows depending on their mean score: Points Obtained Qualitative Description 30-25 Very High 20-24 High 15-19 Moderately High 10- 14 Low 13- 0 Very Low INTERPRETATION The aforementioned assessment form that will be used as instrument of the study is constructed and designed by the researchers as to measure the basic knowledge in exposure technique factor selection regardless of the imaging system used. Its validity and reliability was attested by experts of the field. Moreover, the third part of the assessment is an actual evaluation wherein the respondents are observed during x-ray examination. They will be assessed in the actual selection of the exposure technique factor and the outcome of the image. The said assessment is a point system; the appropriate the RT performs in technique factor selection and the acceptable the image, the higher the points. Based on the results, the level of radiographic competence in terms of respondents skills will be categorized as follows depending on their mean score: Points Obtained Qualitative Description 10 Very high level of radiographic skills 7-9 High level of radiographic skills 4-6 Moderately low level of radiographic skills 1-3 Low level of radiographic skills Low level of radiographic skills means that the respondents were not able to perform the appropriate exposure techniques and came up with an unacceptable radiograph. Moderately low level of radiographic skills me
Subscribe to:
Posts (Atom)